Xerox 6700/DT User Manual
Maintenance
Phaser 6700 Color Printer
89
User Guide
Periodic Maintenance
This section includes:
•
•
Replacing the Fuser ............................................................................................................................................................. 89
•
Replacing the Maintenance Kit ...................................................................................................................................... 91
For information on ordering supplies, see
Ordering Supplies
on page 104.
Replacing the Fuser
Note:
You can watch a video at the printer that shows the removal procedure. Select
Printer > Tools >
Troubleshooting > Resolve Problems > Repeating Spots or Lines, then touch the Video button to
watch the
Fuser video.
WARNING:
To prevent electric shock, always turn off the printer and disconnect the power cord from
the grounded outlet before performing maintenance.
WARNING:
To avoid burns, do not replace the fuser immediately after printing. The fuser becomes
hot during use.
1.
Turn off the printer.
2.
Wait for 30 minutes before proceeding.