Xerox WorkCentre 4265/SM User Manual
Scanning
Xerox
®
WorkCentre
®
4265 Multifunction Printer 109
User Guide
Sending a Scanned Image to a Destination
Before scanning to a destination, configure the destination folders on the server or share the folder on a
personal computer. In addition, you must have at least one Scan To Destination in the address book. If
Scan To Destination properties are not properly configured, the Scan To icon appears grayed out on the
touch screen.
To scan an image and send it to a destination:
1. Load the original on the document glass or in the document feeder.
2. At the printer control panel, press
1. Load the original on the document glass or in the document feeder.
2. At the printer control panel, press
Clear All, then press Services Home.
3. Touch
Scan To > Scan Contacts.
4. Select an option.
5. Select the desired name from the list, then touch
5. Select the desired name from the list, then touch
OK.
6. Change scan settings as needed.
7. Press the green
7. Press the green
Start button.
For details, see
Adjusting Scanning Settings
on page 104.