Xerox WorkCentre 4265/SM User Manual
Installation and Setup
46
Xerox
®
WorkCentre
®
4265 Multifunction Printer
User Guide
Installing the Print Drivers for UNIX and Linux
To install the UNIX print drivers on your computer, you require root or superuser privileges.
Notes:
•
This procedure requires an Internet connection.
•
To install Linux drivers, perform the following steps, then select
Linux instead of UNIX for the
operating system and package.
To install the print driver software:
1. At the printer, do the following:
1. At the printer, do the following:
a. Verify that the TCP/IP protocol is enabled and the network cable is installed.
b. On the printer control panel, for the IP address, do one of the following:
b. On the printer control panel, for the IP address, do one of the following:
•
Allow the printer to set up a DHCP address.
•
Enter the IP address manually.
2. Print the configuration page and keep it for reference. For details on how to print the configuration
page, see
Information Pages
on page 27.
3. At your computer, do the following:
a. From the print driver website for your printer, select your printer model.
b. From the Operating System menu, select
b. From the Operating System menu, select
UNIX, then click Go.
c. Select the appropriate package for your operating system.
d. To begin downloading, click the
d. To begin downloading, click the
Start button.
4. In the notes below the driver package that you selected, click the
Installation Guide link, then
follow the installation instructions.
Other Drivers
•
The Xerox
®
Global Print Driver works with any printer on your network, including those printers
made by other manufacturers. It configures itself for your individual printer upon installation.
•
The Xerox
®
Mobile Express Driver works with any printer available to your computer that supports
standard PostScript. It configures itself for the printer you select every time you print. If you travel
frequently to the same sites, you can save your favorite printers in that location and the driver saves
your settings.