Xerox 3315/DN User Manual

Printing using Macintosh

Xerox WorkCentre 3315DN/3325DN/3325DNI

User Guide

117

Printing using Macintosh

This section explains how to print using a Macintosh. You need to set the print environment before 
printing. Refer to the 

System Administrator Guide.

is a program that monitors and informs you of the machine’s status, and allows you to 

customize the machine’s settings. Smart Panel is installed automatically when you install the machine 
software.

Printing a Document

When you print with a Macintosh, you need to check the printer driver setting in each application you 
use. Follow the steps below to print from a Macintosh.

1.

Open the document you want to print.

2.

Open the File menu and select Page Setup (Document Setup in some applications).

3.

Choose your paper size, orientation, scaling and other options. Make sure that your machine is 
selected and select OK.

4.

Open the File menu and select Print. 

5.

Choose the number of copies you want and indicate which pages you want to print. 

6.

Select Print.

Changing Printer Settings

You can use advanced printing features provided by your machine.

Open an application and select Print from the File menu. The machine name, which appears in the 
printer properties window may differ depending on the machine in use. Except for the name, the 
composition of the printer properties window is similar to the following.

Note:

The setting options may differ depending on the printer and the Macintosh OS version.

The Layout tab provides options to adjust how the document appears on the printed page. You can 
print multiple pages on one sheet of paper.

The Graphics tab provides options for selecting Resolution. Select Graphics from the drop-down list 
under Orientation to access the graphic features.

This option allows you to select the printing resolution. The higher the setting, the sharper the clarity of 
printed characters and graphics. The higher setting also may increase the time it takes to print a 
document.