Manualsbrain.com
  1. Manuals
  2. Brands
  3. Xerox
  4. 5222
  5. User Manual

Xerox 5222 User Manual

Download
Page of 444
Remote Authentication Setup 
333
10.
Select your system from the [Authentication System Settings] drop-down list. 
Configure the [Server Response Time-Out] and [Search Time-Out] settings. Click 
[Apply].
11.
For further configuration, refer to one of the following sections depending on the 
system selected in [Authentication System Settings] in step 10:
Configuring Remote Authentication for Kerberos (Windows 2000)
At your Workstation:
1.
Click the [Properties] tab.
2.
Expand the [Security] folder, and then the [Remote Authentication Servers] folder.
3.
Click [Kerberos Server].
4.
Under [Kerberos Server 1 (Default)], enter the IP address and port of the primary 
server (domain controller running the key distribution center service).
5.
Enter the IP address and port of the secondary server (domain controller), if 
necessary.
6.
Enter the Windows 2000 domain in the [Domain Name] box. For example (in 
uppercase): EXAMPLE.COM
7.
Enter details for up to four alternate domain controllers and backups, if required.
8.
Click [Apply].
Configuring Remote Authentication for Kerberos (Solaris)
At Your Workstation:
1.
Click the [Properties] tab.
2.
Expand the [Security] folder, and then the [Remote Authentication Servers] folder.
3.
Click [Kerberos Server].
4.
Under [Kerberos Server 1 (Default)], enter the IP address and port of the primary 
server (the server running the key distribution center service).
5.
Enter the IP address and port of the secondary server, if necessary.
6.
Enter the domain in the [Domain Name] box. For example: example.com
7.
Enter details for up to four alternate servers and backups, if required.
8.
Click [Apply].
Configuring Remote Authentication for SMB
At Your Workstation:
1.
Click the [Properties] tab.