Xerox 5222 User Manual

Fault Codes 

419

Along with fault codes, the following messages are displayed on the touch screen on 
some occasions.

124-706

The folding setting was cancelled.
Check the folding setting, and try again.

124-708

The output destination was changed to the center tray. Check if the specified 
size paper is loaded in a paper tray.

124-709

The document exceeded the maximum number of pages that can be stapled.
Reduce the number of pages, or cancel the stapling setting, then try printing 
again.

133-210
133-211
133-212
133-213
133-214
133-215
133-216
133-217
133-218
133-219
133-220
133-221
133-222
133-223
133-224

A fax error occurred. Switch off the machine, and then switch it on again. 
Contact the Xerox Welcome Center if the problem persists.

133-226

The specified country code is not supported. Contact the Xerox Welcome 
Center.

133-280
133-281
133-282
133-283

A fax error occurred. Switch off the machine, and then switch it on again. 
Contact the Xerox Welcome Center if the problem persists.

133-700

The staple/punch settings were cancelled. Specify appropriate staple/punch 
positions.

133-710

The received fax data was printed using Tray 5 (Bypass), as the selected tray 
was not available for fax printing. 

134-210
134-211

A fax error occurred. Switch off the machine, and then switch it on again. 
Contact the Xerox Welcome Center if the problem persists.

A fault has occurred.
Switch off the machine. Ensure that the 
screen disappears before switching it on.
If the problem persists, call for service. 

A fault has occurred. Switch off the machine 
and wait until the touch screen is completely 
off, and then restart the machine. If the 
problem persists, write down the fault code 
(xxx-yyy) displayed on the screen. Switch off 
the machine and contact the Xerox Welcome 
Center.