Xerox 5252 User Manual
DocuColor 5252 O perator Manual
3-8
Overview
Circuit Breaker
The digital press is equipped with an additional safety circuit
breaker. This device will trip if there is an electrical overload.
breaker. This device will trip if there is an electrical overload.
Figure 3-5
In the case of a building power outage, the digital press should be
powered on as soon as possible after the power is restored, and a
print should be made to ensure that no damage to the digital press
has occurred.
powered on as soon as possible after the power is restored, and a
print should be made to ensure that no damage to the digital press
has occurred.
If power to the digital press fails to return, do the following:
1
Locate the circuit breaker on the back of the digital press on the
electrical module next to the toner waste bottle.
electrical module next to the toner waste bottle.
2
If the device has been tripped, the switch will be in the Off position
(down). Flip the switch up to the ON position.
(down). Flip the switch up to the ON position.
Note:
If the Circuit Breaker trips again, or if power is not restored
by the above procedure, call your Xerox service representative.
Circuit Breaker
Ecology Module