Xerox 5252 User Manual
3
Ov
erv
iew
DocuColor 5252 Operator Manual
3-35
Overview
Document Glass
Figure 3-24
1
Lift the DADF and place the original face down in the upper-left
corner using the same orientation on the Document Glass as the
paper in the chosen paper tray (Long Edge Feed (LEF) on the
glass if the paper in the chosen paper tray is LEF. Short Edge
Feed (SEF) on the glass if the paper in the chosen paper tray is
SEF).
corner using the same orientation on the Document Glass as the
paper in the chosen paper tray (Long Edge Feed (LEF) on the
glass if the paper in the chosen paper tray is LEF. Short Edge
Feed (SEF) on the glass if the paper in the chosen paper tray is
SEF).
Caution:
When copying a bound document, DO NOT apply
excessive force to close the DADF.
2
Lower the Duplex Automatic Document Feeder.
3
Press the Start button to begin the scan operation.
The maximum scanned image size is 11 x 17 inches or A3. To
copy an image of this size onto 12 x 17.7 inch or SRA3 paper, you
must select 102
The maximum scanned image size is 11 x 17 inches or A3. To
copy an image of this size onto 12 x 17.7 inch or SRA3 paper, you
must select 102
& enlargement. Refer to the Paper and Paper
Trays Chapter of this manual for more information on
programming the system for the various paper sizes.
programming the system for the various paper sizes.
Key point:
You may not use the Auto Color option if the Duplex
Automatic Document Feeder must remain open during copying.
The digital press with scanner will not operate until you make a
different selection under the Color Mode feature.
The digital press with scanner will not operate until you make a
different selection under the Color Mode feature.