Xerox 840 User Manual
160
PhaserShare Networking Manual
15
Disabling Protocols
5.
Disabling EtherTalk:
To return the printer to normal operation, go
immediately to Step 8; to continue and disable the EtherTalk protocol,
follow these steps:
follow these steps:
a.
Press
---->
; the front panel displays
EtherTalk
.
b.
Press
Menu
; the front panel displays the current status of the protocol:
EtherTalk:Enabled
or
EtherTalk:Disabled.
The current
status is marked with an asterisk (
*
) in the upper-right corner of the
display.
c.
Press
---->
until the front panel displays
EtherTalk:Disabled
.
d.
Press
OK
to disable the protocol; the front panel briefly displays
Selected
, then it displays
EtherTalk
.
6.
Disabling NetWare:
To return the printer to normal operation, go
immediately to Step 8; to continue and disable the NetWare protocol,
follow these steps:
follow these steps:
a.
Press
---->
; the front panel displays
NetWare
.
b.
Press
Menu
again; the front panel displays
Interface
.
c.
Press
Menu
to display the current status of the protocol:
Interface:Enabled
or
Interface:Disabled
. The current status
is marked with an asterisk (
*
) in the upper-right corner of the display.
d.
Press
---->
until the front panel displays
Interface:Disabled
.
e.
Press
OK
to disable the protocol; the front panel briefly displays
Selected
, then it displays
Interface
.
f.
Press Exit (the far left button) to return to the
NetWare
display.
7.
Disabling HTTP:
To return the printer to normal operation, go immediately
to Step 8; to continue and disable the HTTP protocol, follow these steps:
a.
Press
---->
; the front panel displays
HTTP
.
b.
Press
Menu
; the front panel displays the current status of the protocol:
HTTP:Enabled or HTTP:Disabled
. The current status is marked
with an asterisk (
*
) in the upper-right corner of the display.
c.
Press
---->
until the front panel displays
HTTP:Disabled
.
d.
Press
OK
to disable the protocol; the front panel briefly displays
Selected
, then it displays
HTTP
.