Xerox 840 User Manual
162
PhaserShare Networking Manual
15
Disabling Protocols
6.
Disabling NetWare:
To return the printer to normal operation, go
immediately to Step 8; to continue and disable the NetWare protocol,
follow these steps:
follow these steps:
a.
Press the right arrow button until the front panel displays
NetWare
.
b.
Press
Menu
; the front panel displays
Interface
.
c.
Press
Menu
again to display the current status of the protocol:
On
or
Off
. The current status is marked with an asterisk (
*
) in the
upper-right corner of the display.
d.
Press the right arrow button until the front panel displays
Off
.
e.
Press
Select
to disable the protocol; the front panel briefly displays
Selected
, then it displays
Off
again.
f.
Press Exit (the far right button) twice to return to the
Network
Settings
menu.
7.
Disabling HTTP:
To return the printer to normal operation, go immediately
to Step 8; to continue and disable the HTTP protocol, follow these steps:
a.
Press the right arrow button until the front panel displays
HTTP
.
b.
Press
Menu
to display the current status of the protocol:
On
or
Off
.
The current status is marked with an asterisk (
*
) in the upper-right
corner of the display.
c.
Press the right arrow button until the front panel displays
Off
.
d.
Press
Select
to disable the protocol; the front panel briefly displays
Selected
, then it displays
Off
again.
e.
Press Exit (the far right button) twice to return to the
Network
Settings
menu.
8.
Return the printer to normal operation, press Exit (the far right button)
again:
again:
■
If you have changed any parameters that require a printer reset to take
effect, you will be prompted to reset the printer. If you press
effect, you will be prompted to reset the printer. If you press
Reset
,
the printer resets. If you press
Resume
, the front panel displays
Network Settings
. Press Exit (the far right button); the printer
returns to normal operation, but the changes you have made will not
take effect until the next time the printer is reset.
take effect until the next time the printer is reset.
■
If you have not changed any parameters that require a printer reset to
take effect, the front panel displays
take effect, the front panel displays
Ready
.