Xerox 1300 series User Manual

Page of 162
ENWW
Troubleshooting PostScript (PS) errors 79
Troubleshooting PostScript (PS) errors
The following situations are PS language specific and may occur when several printer languages 
are being used.
Note
To receive a printed or screen displayed message when PS errors occur, open the Print Options 
dialog box and click the desired selection next to the PS Errors section. You can also access this 
from the embedded Web server.
Return to 
PS Errors
Symptom
Possible Cause
Solution
The job prints in Courier (the 
printer’s default typeface) 
instead of the typeface you 
requested.
The requested typeface is not 
downloaded. A personality 
switch may have been 
performed to print a PCL job 
just before the PS printing job 
was received.
Download the desired font and send the 
print job again. Verify the type and location 
of the font. Download to printer if 
applicable. Check with the software 
documentation.
A legal page prints with 
clipped margins. 
Print job too complex.
You may need to print your job at 600 dots 
per inch, reduce the complexity of the 
page, or install more memory. 
A PS error page prints.
Print job may not be PS.
Make sure the print job is a PS job. Check 
to see whether the software application 
expected a setup or PS header file to be 
sent to the printer.
Limit Check Error
Print job is too complex.
You may need to print your job at 600 dots 
per inch, reduce the complexity of the 
page, or install more memory.
VM Error
Font Error
Select unlimited downloadable fonts from 
printer driver.
Range Check
Font Error
Select unlimited downloadable fonts from 
printer driver.