Manualsbrain.com
  1. Manuals
  2. Brands
  3. Edimax Technology
  4. PS-1201
  5. User Manual

Edimax Technology PS-1201 User Manual

Download
Page of 111
 
6.2  Enable PrintSir’s TCP/IP Support 
The default configuration of the PrintSir is with 
TCP/IP support enabled. Anyway, you can configure the 
PrintSir to enable TCP/IP support using the configuration 
program or PSETUP program in the CD-ROM included 
with the PrintSir.  
6.3  Setup PrintSir’s IP Address 
The PrintSir must have a unique IP address in order to 
be recognized by the network. 
You can set up the IP address on the various Unix 
systems using any one of the following methods: 
1.  ARP & Ping Assignment (Recommend for Unix) 
2.  DHCP (Dynamic Host Configuration Protocol) 
3.  BOOTP (Bootstrap Protocol) 
4.  RARP (Reverse Address Resolution Protocol) 
The PrintSir will use the last three methods to obtain 
its IP address automatically if its IP address is configured 
as Auto (0.0.0.0). 
6.3.1  ARP & Ping Assignment 
You can use ARP and Ping commands with a web 
browser to complete PrintSir’s IP address setting. 
Parameters for the commands are as follows: 
arp 
–s <IP Address> <Ethernet ID> 
71