Ericsson SP4900HDR User Manual

•

Choose 

 

if you’re printing on canvas or other heavy media. Media 

that is too thick may damage the cutter. Use of an external cutter/scissor 
is recommended.

Also choose this setting if you want to print a series of pages and keep 
them together for cutting later on. The following media (and other 
similar materials) do not work with, or may shorten the life of, the 
built-in cutter:

•

Fine art paper

•

Canvas

•

Vinyl

•

Matte board

•

Heavyweight polyester banner media

When you perform borderless printing on roll paper, you may need to install 
the borderless printing spacer supplied with the printer, depending on the 
width of the paper.

1. Remove the black paper stop from the spindle. When the 3-inch core 

adapters are attached to the spindle, remove both left and right adapters.

2. Install the borderless printing spacer onto the gray paper stop. Push the 

spacer until the holes line up with the holes in the paper stop.

1. Remove the black paper stop from the spindle.