Ericsson SP4900HDR User Manual

2. Remove the spacer by holding the outer edge and pulling straight off the 

spindle.

Follow these steps to attach the roll to the spindle:

1. Slide the black paper stop (flange) off the left end of the spindle.

2. Position the roll so the paper unwinds as shown, then slide the spindle 

into the paper core.

3. Slide the black paper stop back onto the spindle and insert it into the 

end of the roll.

Make sure it is firmly fixed into the left end of the paper 

roll.

Note: The spindle 
accommodates both 
2-inch and 3-inch roll 
paper cores. To switch 
between different size 
cores, see page 56. 

Avoid touching the 
printable surface of 
the paper as much as 
possible. Oils from 
your skin can affect 
print quality.