Samsung ML-3560 Series User Manual
Solving Problems
7.3
Half the
page is
blank.
page is
blank.
The page layout is
too complex.
too complex.
Simplify the page layout and remove
any unnecessary graphics from the
document.
Install more memory in your printer.
See “Installing Memory DIMM” on
page 9.1.
any unnecessary graphics from the
document.
Install more memory in your printer.
See “Installing Memory DIMM” on
page 9.1.
The page orientation
setting may be
incorrect.
setting may be
incorrect.
Change the page orientation in your
application. For details, see the
Software Section.
application. For details, see the
Software Section.
The paper size and
the paper size
settings do not
match.
the paper size
settings do not
match.
Ensure that the paper size in the
printer driver settings matches the
paper in the tray.
Or, ensure that the paper size in the
printer driver settings matches the
paper selection in the software
application settings you use.
printer driver settings matches the
paper in the tray.
Or, ensure that the paper size in the
printer driver settings matches the
paper selection in the software
application settings you use.
The paper
keeps
jamming.
keeps
jamming.
There is too much
paper in the paper
tray.
paper in the paper
tray.
Remove excess paper from the tray.
If printing on special materials, use
the Multi-Purpose Tray.
If printing on special materials, use
the Multi-Purpose Tray.
An incorrect type of
paper is being used.
paper is being used.
Use only paper that meets printer
specifications.
If printing on special materials, use
the Multi-Purpose Tray.
specifications.
If printing on special materials, use
the Multi-Purpose Tray.
An incorrect output
method is being
used.
method is being
used.
Special print materials, such as thick
paper, should not be printed using
the output tray (face-down). Use the
rear cover (face-up) instead.
paper, should not be printed using
the output tray (face-down). Use the
rear cover (face-up) instead.
There may be debris
inside the machine.
inside the machine.
Open the top cover and remove the
debris.
debris.
The printer
prints, but
the text is
wrong,
garbled, or
incomplete.
prints, but
the text is
wrong,
garbled, or
incomplete.
The printer cable is
loose or defective.
loose or defective.
Disconnect and reconnect the printer
cable. Try a print job that you have
already printed successfully. If
possible, attach the cable and
printer to another computer and try
a print job that you know works.
Finally, try a new printer cable.
cable. Try a print job that you have
already printed successfully. If
possible, attach the cable and
printer to another computer and try
a print job that you know works.
Finally, try a new printer cable.
The wrong printer
driver was selected.
driver was selected.
Check the application’s printer
selection menu to ensure that your
printer is selected.
selection menu to ensure that your
printer is selected.
The software
application is
malfunctioning.
application is
malfunctioning.
Try printing a job from another
application.
application.
Problem
Possible Cause
Solution
The printer
prints, but
the text is
wrong,
garbled, or
incomplete.
prints, but
the text is
wrong,
garbled, or
incomplete.
(Continued)
The operating
system is
malfunctioning.
system is
malfunctioning.
If printing from Windows (any
version), exit to a DOS prompt and
verify functionality with the following
command: At a C:\ prompt, type
Dir LPT1, and press Enter. (This
assumes you are connected to
LPT1.)
Exit Windows and reboot the
computer. Turn the printer off and
then back on again.
version), exit to a DOS prompt and
verify functionality with the following
command: At a C:\ prompt, type
Dir LPT1, and press Enter. (This
assumes you are connected to
LPT1.)
Exit Windows and reboot the
computer. Turn the printer off and
then back on again.
You may start your
job before turnning
the printer on.
job before turnning
the printer on.
Make sure that you turn on the
printer and start your job.
printer and start your job.
Pages print,
but are
blank.
but are
blank.
The toner cartridge
is defective or out of
toner.
is defective or out of
toner.
Redistribute the toner cartridge. See
page 6.2.
If necessary, replace the toner
cartridge. See page 6.3.
page 6.2.
If necessary, replace the toner
cartridge. See page 6.3.
The file may have
blank pages.
blank pages.
Check the file to ensure that it does
not contain blank pages.
not contain blank pages.
Some parts, such as
the controller or the
board, may be
defective.
the controller or the
board, may be
defective.
Contact a service representative.
The
illustrations
print
incorrectly in
Adobe
Illustrator.
illustrations
incorrectly in
Adobe
Illustrator.
The setting in the
software application
is wrong.
software application
is wrong.
Select Download as Bit Image in
the Advanced Options window of
the graphic properties. Print the
document again.
the Advanced Options window of
the graphic properties. Print the
document again.
Problem
Possible Cause
Solution