Yamaha VL70-m User Manual

Settings: Pr1, Pr2, Cst

This parameter refers to the bank containing the
selected voice in the VOICE PLAY main control
mode. It selects the VL70-m PRESET 1 (Pr1),
PRESET 2 (Pr2) or CUSTOM (Cst) voice bank
(see “Voice Organization” on page 26).

Settings: 001 … 128

This parameter refers to the selected voice in the
VOICE PLAY main control mode. The PRESET 1
and PRESET 2 banks each have voice numbers
from “001” to “128”, and the CUSTOM bank has
voice numbers from “001” to “006”.

Settings: 000 … 127

Adjusts the level of the signal sent to the VL70-m
reverb effect stage. The higher the value, the
higher the level of the reverb send signal.

Settings: 000 … 127

Adjusts the level of the signal sent to the VL70-m
chorus effect stage. The higher the value, the
higher the level of the chorus send signal.

Settings: 000 … 127

Adjusts the level of the signal sent to the VL70-m
variation effect stage. The higher the value, the
higher the level of the variation send signal.

Settings: -24 … 0 … +24

Transposes the pitch of the current voice down or
up in semitone steps over a 

±

2 octave range. “+00”

corresponds to standard pitch. Each increment
corresponds to a semitone. A setting of “-12”, for
example, transposes the pitch down one octave.

■ NOTES
• The Reverb Send, Chorus Send, Variation Send, Note