Ricoh Type W3600 User Manual

Delivering Scan Files

84

This section describes the preparations and settings for delivering scan files.

❒ To use the network delivery scanner function, you need a delivery server on

which the optional the ScanRouter delivery software is installed. For details
about the ScanRouter delivery software, see the manuals supplied with the
ScanRouter delivery software.

❒ To view files delivered to an in-tray, DeskTopBinder must be installed on the

client computer.

A

Connect the machine to the network.
Connect the machine to the network using an Ethernet cable or wireless LAN
(IEEE 802.11b).

B

Make the necessary network settings in [System Settings].
If you have connected the machine to the network using an Ethernet cable,
make the following settings. For details, see General Settings Guide.
• Specify the machine’s IPv4 address and subnet mask
• In [Effective Protocol], enable [IPv4]
• Set [Delivery Option] to [On]

C

D

Using the ScanRouter delivery software, register this machine as an I/O de-
vice. In addition, specify register destinations and specify such settings as
the delivery type and sender.
For details, see the manuals supplied with the ScanRouter delivery software.

❒ To connect the machine to the network using a wireless LAN (IEEE

802.11b), an extended wireless LAN board is required respectively. For de-
tails, see Network Guide.

❒ Items to set up in [System Settings] vary depending on the network environ-

ment. For details about the network settings, see General Settings Guide.

❒ For details about installing DeskTopBinder Lite, see "Installing DeskTop-

Binder Lite from the Supplied CD-ROM".