Lexmark MX310dn User Manual

Connected
Disconnected

View the connection status of the wireless network adapter.

View the speed of an active wireless network adapter.

UAA
LAA

View the network addresses.

0, 10–225 seconds

Set the amount of time it takes for a network print job to be canceled.

“90 seconds” is the factory default setting.

A setting value of 0 disables the timeout.

If a value between 1 and 9 is selected, then Invalid appears on the
display, and the value is not saved.

Off
On

Allow the printer to print a banner page.

Note: Off is the factory default setting.

To access the menu, navigate to either of the following:

Network/Ports > Standard Network > Standard Network Setup > TCP/IP

Network/Ports > Network [x] > Network [x] Setup > TCP/IP

Note: This menu is available only in network printers or printers attached to print servers.

Set the current TCP/IP host name.

Note: This can be changed only from the Embedded Web Server.

View or change the current TCP/IP address.

Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
support BOOTP and RARP.

View or change the current TCP/IP netmask.

View or change the current TCP/IP gateway.

On
Off

Specify the DHCP address and parameter assignment.

Note: On is the factory default setting.

On
Off

Specify the RARP address assignment setting.

Note: Off is the factory default setting.

Understanding the printer menus

111