Lexmark MX310dn User Manual
Use
To
View Security Mode
View the encryption method for the wireless network.
AppleTalk menu
Note: This menu is available only in printer models connected to a wired network or when an optional network card
is installed.
is installed.
To access the menu, navigate to any of the following:
•
Network/Ports > Standard Network > Standard Network Setup > AppleTalk
•
Network/Ports > Network Setup [x] > AppleTalk
Use
To
Activate
Yes
No
No
Enable or disable AppleTalk support.
Note: Yes is the factory default setting.
View Name
Show the assigned AppleTalk name.
Note: The name can be changed only from the Embedded Web Server.
View Address
Show the assigned AppleTalk address.
Note: The address can be changed only from the Embedded Web Server.
Set Zone
[list of zones available on the network]
Provide a list of AppleTalk zones available on the network.
Note: The factory default setting is the default zone for the network. If no
default zone exists, then the zone marked with an asterisk (*) is the default
setting.
default zone exists, then the zone marked with an asterisk (*) is the default
setting.
SMTP Setup menu
Use
To
Primary SMTP Gateway
Specify SMTP server gateway and port information.
Note: 25 is the default SMTP gateway port.
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout
5–30
Specify the amount of time in seconds before the server stops trying to
send an e
send an e
‑mail.
Note: 30 seconds is the factory default setting.
Reply Address
Specify a reply address of up to 128 characters in the e-mail sent by the
printer.
printer.
Understanding the printer menus
114