Lexmark MX310dn User Manual
Use
To
Enhance Fine Lines
On
Off
Off
Enable a print mode preferable for files such as architectural drawings, maps, electrical
circuit diagrams, and flow charts.
circuit diagrams, and flow charts.
Notes:
•
Off is the factory default setting.
•
You can set this option from the printer software. For Windows users, click File >
Print, and then click Properties, Preferences, Options, or Setup. For Macintosh
users, choose File > Print, and then adjust the settings from the Print dialog and
pop
Print, and then click Properties, Preferences, Options, or Setup. For Macintosh
users, choose File > Print, and then adjust the settings from the Print dialog and
pop
‑up menus.
•
To set this option using the Embedded Web Server, type the network printer IP
address in the Web browser address field.
address in the Web browser address field.
Gray Correction
Auto
Off
Off
Automatically adjust the contrast enhancement applied to images.
Note: Auto is the factory default setting.
Brightness
‑6 to 6
Adjust the printed output either by lightening or darkening it. You can conserve toner
by lightening the output.
by lightening the output.
Note: 0 is the factory default setting.
Contrast
0–5
Adjust the contrast of printed objects.
Note: 0 is the factory default setting.
Utilities menu
Use
To
Format Flash
Yes
No
No
Format the flash memory.
Warning—Potential Damage: Do not turn off the printer while the flash memory is
being formatted.
being formatted.
Notes:
•
Yes deletes all data stored in flash memory.
•
No cancels the format request.
•
Flash memory refers to the memory added by installing a flash memory card in
the printer.
the printer.
•
The flash memory option card must not be read/write
‑ or write‑protected.
•
This menu item appears only when a non
‑defective flash memory card is
installed.
Activate Hex Trace
Assist in isolating the source of a print job problem.
Notes:
•
When activated, all data sent to the printer is printed in hexadecimal and
character representation, and control codes are not executed.
character representation, and control codes are not executed.
•
To exit or deactivate Hex Trace, turn off or reset the printer.
Coverage Estimator
Off
On
On
Provide an estimate of the percentage coverage of toner on a page. The estimate is
printed on a separate page at the end of each print job.
printed on a separate page at the end of each print job.
Note: Off is the factory default setting.
Understanding the printer menus
142