Lexmark MX310dn User Manual
Maintenance kit nearly low [80.xy]
For more information, visit the Lexmark support Web site at
or contact customer support,
and then report the message.
If necessary, select Continue to clear the message and continue printing. For non
‑touch‑screen printer models,
press
to confirm.
Maintenance kit very low, [x] estimated pages remain [80.xy]
You may need to replace the maintenance kit very soon. For more information, visit the Lexmark support Web site at
or contact customer support, and then report the message.
If necessary, select Continue on the printer control panel to clear the message and continue printing. For
non
‑touch‑screen printer models, press
to confirm.
Memory full, cannot print faxes
From the printer control panel, select Continue to clear the message without printing. For non
‑touch‑screen printer
models, press
to confirm.
Note: Held faxes will attempt to print after the printer restarts.
Memory full, cannot send faxes
1
From the printer control panel, select Continue to clear the message and cancel the fax job. For non
‑touch‑screen
printer models, press
to confirm.
2
Do either of the following:
•
Reduce the fax resolution, and then resend the fax job.
•
Reduce the number of pages in the fax, and then resend fax job.
Memory full [38]
Try one or more of the following:
•
From the printer control panel, select Cancel job to clear the message. For non
‑touch‑screen printer models, press
to confirm.
•
Install additional printer memory.
Network [x] software error [54]
Try one or more of the following:
•
From the printer control panel, select Continue to continue printing. For non
‑touch‑screen printer models, press
to confirm.
•
Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
Troubleshooting
191