Lexmark X792dtfe User Manual

Lexar JumpDrive 2.0 Pro (256MB, 512MB, or 1GB sizes)

SanDisk Cruzer Mini (256MB, 512MB, or 1GB sizes)

Hi

‑Speed USB flash drives must support the Full‑Speed standard. Devices supporting only USB

low

‑speed capabilities are not supported.

USB flash drives must support the FAT (File Allocation Tables) system. Devices formatted with NTFS
(New Technology File System) or any other file system are not supported.

Documents:

.pdf

.xps

Images:

.dcx

.gif

.JPEG

.jpg

.bmp

.pcx

.TIFF

.tif

.png

Use letterhead designed specifically for laser printers.

Print samples on the letterhead being considered for use before buying large quantities.

Before loading letterhead, flex the sheets to prevent them from sticking together.

Observe proper page orientation.

Standard 550

‑sheet tray

Optional 550

‑sheet tray

Optional 2000

‑sheet

high

‑capacity feeder

Preprinted letterhead design is placed
faceup.

The top edge of the sheet with the logo is
placed at the left side of the tray.

Duplex (two

‑sided) printing

from trays

Preprinted letterhead design is placed
facedown.

The top edge of the sheet with the logo is
placed at the right side of the tray.

Multipurpose feeder (simplex
printing)

Preprinted letterhead design is placed
facedown.

The top edge of the sheet with the logo
should enter the multipurpose feeder
first.

Multipurpose feeder (duplex
printing)

Preprinted letterhead design is placed
faceup.

The top edge of the sheet with the logo
should enter the multipurpose feeder last.

Note: Check with the manufacturer or vendor to determine whether the chosen preprinted letterhead is acceptable
for laser printers.

Printing

90