Lexmark MX711de User Manual
To install a printer hard disk onto the ISP:
a
Remove the screws attached to the printer hard disk mounting bracket, and then remove the bracket.
b
Align the standoffs of the printer hard disk to the holes in the ISP, and then press the printer hard disk down
until the standoffs are in place.
until the standoffs are in place.
Installation warning: Hold only the edges of the printed circuit board assembly. Do not touch or press on
the center of the printer hard disk. Doing so may cause damage.
the center of the printer hard disk. Doing so may cause damage.
c
Insert the plug of the printer hard disk interface cable into the receptacle of the ISP.
Note: The plugs and receptacles are color
‑coded.
Additional printer setup
42