Lexmark MX711de User Manual

For more information about Lexmark, visit 

. General sustainability-related information can be found

at the Environmental Sustainability link.

Use these paper storage guidelines to help avoid jams and uneven print quality:

For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent. Most
label manufacturers recommend printing in a temperature range of 18–24°C (65–75°F) with relative humidity
between 40 and 60 percent.

Store paper in cartons, on a pallet or shelf, rather than on the floor.

Store individual packages on a flat surface.

Do not store anything on top of individual paper packages.

Take paper out of the carton or wrapper only when you are ready to load it in the printer. The carton and wrapper
help keep the paper clean, dry, and flat.

The following tables provide information on standard and optional paper sources and the sizes, types, and weights of
paper they support.

Note: For an unlisted paper size, select the closest larger listed size.

Note: When printing on paper less than 210 mm (8.3 inches) wide, the printer may print at a reduced speed after a
period of time to ensure the best print performance.

‑

‑sheet

‑sheet tray Multipurpose

210 x 297 mm
(8.3 x 11.7 in.)

148 x 210 mm
(5.8 x 8.3 in.)

2

105 x 148 mm
(4.1 x 5.8 in.)

182 x 257 mm
(7.2 x 10.1 in.)

1

 If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes

that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not
available, then select Universal or turn off tray size sensing. For more information, contact customer support.

2

 Paper is supported in long

‑edge orientation.

3

 Universal is supported in ADF only if the width is from 76 mm (3 in.) to 216 mm (8.5 in.), and the length is from 127 mm

(5 in.) to 356 mm (14 in.).

Paper and specialty media guide

90