Lexmark MS710 User Manual

RAM
Flash
Disk

Set the storage location for downloads.

RAM is the factory default setting. Storing downloads in the
RAM is temporary.

Storing downloads in a flash memory or in a printer hard disk
places them in permanent storage. Downloads remain in the
flash memory or on the printer hard disk even when the
printer is turned off.

This menu item appears only when an optional flash memory
or a formatted, working printer hard disk is installed.

On
Off

Specify how the printer handles temporary downloads, such as
fonts and macros stored in the RAM, when the printer receives a
print job that requires more than the available memory.

Off is the factory default setting. This sets the printer to
retain downloads only until memory is needed. Downloads
are deleted in order to process print jobs.

On retains the downloads during language changes and
printer resets. If the printer runs out of memory, then
Memory Full [38]

 appears on the printer display, but

downloads are not deleted.

1 sided
2 sided

Specify whether two

‑sided (duplex) printing is set as the default for all print jobs.

“1 sided” is the factory default setting.

You can set two

‑sided printing from the printer software.

For Windows users:

Click File > Print, and then click Properties, Preferences, Options, or Setup.
For Macintosh users:

Choose File > Print, and then adjust the settings from the Print dialog and pop

‑up

menus.

Long Edge
Short Edge

Define the way duplexed pages are bound and printed.

Long Edge is the factory default setting. Long Edge assumes binding along the
long edge of the page (left edge for portrait and top edge for landscape).

Short Edge assumes binding along the short edge of the page (top edge for
portrait and left edge for landscape).

1–999

Specify the default number of copies for each print job.

Note: 1 is the factory default setting.

Understanding printer menus

121