Lexmark MS710 User Manual
Disk full [62]
Try one or more of the following:
•
From the printer control panel, press
to clear the message and continue printing.
•
Delete fonts, macros, and other data stored in the printer hard disk.
•
Install a printer hard disk with larger capacity.
Disk must be formatted for use in this device
From the printer control panel, select Format disk to format the printer hard disk and clear the message.
Note: Formatting deletes all the files stored in the printer hard disk.
Disk near full. Securely clearing disk space.
Try one or more of the following:
•
From the printer control panel, press
to clear the message.
•
Delete fonts, macros, and other data stored in the printer hard disk.
•
Install a printer hard disk with higher capacity.
Empty the hole punch box
1
Empty the hole punch box.
For more information, see the “Cleaning the printer” section of the User’s Guide.
2
Reinsert the hole punch box into the finisher, and then press
on the printer control panel to clear the message.
Error reading USB drive. Remove USB.
An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.
Error reading USB hub. Remove hub.
An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.
Imaging unit low [84.xy]
You may need to order an imaging unit. If necessary, press
on the printer control panel to clear the message and
continue printing.
Imaging unit nearly low [84.xy]
If necessary, press
on the printer control panel to clear the message and continue printing.
Troubleshooting
187