Lexmark MS710 User Manual
Action
Yes
No
Step 1
a
Reinstall the imaging unit.
1
Remove the toner cartridge, and then the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to
direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.
direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.
2
Install the imaging unit, and then the cartridge.
b
Resend the print job.
Is the printer printing solid black pages?
Go to step 2.
The problem is solved.
Step 2
Replace the imaging unit, and then resend the print job.
Is the printer printing solid black pages?
Contact
.
The problem is solved.
Repeating defects appear on prints
)
)
)
)
)
)
Action
Yes
No
Step 1
a
Replace the imaging unit if the distance between the defects is equal
to any of the following:
to any of the following:
•
47.8 mm (1.88 in.)
•
96.8 mm (3.81 in.)
•
28.5 mm (1.12 in.)
b
Resend the print job.
Do repeating defects still appear on prints?
Go to step 2.
The problem is solved.
Step 2
a
Replace the fuser if the distance between the defects is equal to either
of the following:
of the following:
•
87.9–92.7 mm (3.46–3.65 in.)
•
95.2 mm (3.75 in.)
b
Resend the print job.
Do repeating defects still appear on prints?
Contact
.
The problem is solved.
Troubleshooting
227