3com 3C10316 User Manual
PRODUCT DESCRIPTION
3COM SKU
NBX 100 Call Processor
One NBX 100 call processor required per system; supports 200 NBX devices and 12 NBX voicemail languages; manages all call traffic;
provides embedded application hosting, external application gateway connectivity, telephony adjunct connectors for Music on Hold
(1/8” RCA) and Paging (RJ-11), one 10BASE-T MIDI uplink port, and one system hard disk.
One NBX 100 call processor required per system; supports 200 NBX devices and 12 NBX voicemail languages; manages all call traffic;
provides embedded application hosting, external application gateway connectivity, telephony adjunct connectors for Music on Hold
(1/8” RCA) and Paging (RJ-11), one 10BASE-T MIDI uplink port, and one system hard disk.
3C10110D
NBX 100 Chassis
Offers six universal card slots; base capacity includes NBX Voice Mail license for four automated attendant/voicemail (AA/VM) ports,
30 minutes message storage, IP On-the-Fly License, one switchable 110/220 V 50/60 Hz AC power supply, a 2.43 m/8 ft U.S. power cord,
48.26 cm/19” rack/wall mounting ears, and one trial port of NBX ConneXtions, NBX pcXset™ softphone, IP On-the-Fly License, and NBX
Media Driver. Compatible with NBX V3000 and V5000 systems.
Offers six universal card slots; base capacity includes NBX Voice Mail license for four automated attendant/voicemail (AA/VM) ports,
30 minutes message storage, IP On-the-Fly License, one switchable 110/220 V 50/60 Hz AC power supply, a 2.43 m/8 ft U.S. power cord,
48.26 cm/19” rack/wall mounting ears, and one trial port of NBX ConneXtions, NBX pcXset™ softphone, IP On-the-Fly License, and NBX
Media Driver. Compatible with NBX V3000 and V5000 systems.
3C10211C-XX
NBX Uplink Card
Includes eight RJ-45 uplink ports (10 Mbps shared Ethernet) to add an NBX chassis or to support other NBX devices.
Includes eight RJ-45 uplink ports (10 Mbps shared Ethernet) to add an NBX chassis or to support other NBX devices.
3C10370
NBX Analog Line Card (FXO)
Terminates up to four Loop-start PSTN telephone lines to the NBX system via four RJ-11 interfaces; includes built-in caller ID support
(service must be purchased from a telco/PTT) and built-in power failure transfer jack. Requires R4.1 or higher system software.
Terminates up to four Loop-start PSTN telephone lines to the NBX system via four RJ-11 interfaces; includes built-in caller ID support
(service must be purchased from a telco/PTT) and built-in power failure transfer jack. Requires R4.1 or higher system software.
3C10114C
NBX Analog Terminal Card (FXS)
Terminates up to four tip/ring analog devices such as an analog phone, cordless phone, Group 3 fax machine, speakerphone adjunct,
etc. Does not support modems. Requires R4.1 or higher system software.
Terminates up to four tip/ring analog devices such as an analog phone, cordless phone, Group 3 fax machine, speakerphone adjunct,
etc. Does not support modems. Requires R4.1 or higher system software.
3C10117C
NBX Analog Adapter (FXS)
Standalone device converts an Ethernet connection into an analog station port (FXS) for industry standard analog phones or similar
devices; provides a switched 10/100 Ethernet port for another device such as a PC; supports IEEE 802.3af Power over Ethernet (PoE);
does not support modems; local power supply included. Requires NBX R4.2 or higher system software.
Standalone device converts an Ethernet connection into an analog station port (FXS) for industry standard analog phones or similar
devices; provides a switched 10/100 Ethernet port for another device such as a PC; supports IEEE 802.3af Power over Ethernet (PoE);
does not support modems; local power supply included. Requires NBX R4.2 or higher system software.
3C10400-XX
NBX T1/PRI Card
Terminates a voice T1, T1/PRI, or Q.Sig slave circuit into the NBX system; for optimized network loading includes a 10/100 MB MDI
uplink port to connect to a LAN switch port, plus a built-in CSU. Requires R4.3 or higher system software.
Terminates a voice T1, T1/PRI, or Q.Sig slave circuit into the NBX system; for optimized network loading includes a 10/100 MB MDI
uplink port to connect to a LAN switch port, plus a built-in CSU. Requires R4.3 or higher system software.
3C10116D
NBX BRI-ST Card
Terminates up to eight ISDN BRI-ST lines into the NBX system. Requires R2.6 or higher system software.
Terminates up to eight ISDN BRI-ST lines into the NBX system. Requires R2.6 or higher system software.
3C10164C-ST
NBX E1/PRI Card
Terminates a voice E1/PRI or PRI/Q.Sig slave circuit into the NBX system; for optimized network loading includes a 10/100 MB MDI
uplink port to connect to a LAN switch port, plus a built-in CSU. Requires R4.3 or higher system software.
Terminates a voice E1/PRI or PRI/Q.Sig slave circuit into the NBX system; for optimized network loading includes a 10/100 MB MDI
uplink port to connect to a LAN switch port, plus a built-in CSU. Requires R4.3 or higher system software.
3C10165D
NBX 100 Voice Mail Upgrade Licenses
The NBX 100 Chassis includes 30 minutes of voicemail (VM) storage and four automated attendant (AA) ports; options offer
price/capacity choices that ensure growth is efficient and economical; each requires a keycode to activate.
The NBX 100 Chassis includes 30 minutes of voicemail (VM) storage and four automated attendant (AA) ports; options offer
price/capacity choices that ensure growth is efficient and economical; each requires a keycode to activate.
From VM storage/AA ports
To VM storage/AA ports
30 minutes/4 ports
4 hours/4 ports
3C10137
30 minutes/4 ports
20 hours/6 ports
3C10134
30 minutes/4 ports
80 hours/12 ports
3C10135
4 hours/4 ports
20 hours/6 ports
3C10138
4 hours/4 ports
80 hours/12 ports
3C10139
20 hours/6 ports
80 hours/12 ports
3C10136
3 C O M
®
N B X
®
1 0 0 I P T E L E P H O N Y S O L U T I O N R 5 . 0 D ATA S H E E T
2
Specifications
System Requirements
100BASE-TX or switched Ethernet LAN
3Com NBX 100 call processor and chassis
Min. two 3Com IP phones
Min. one PSTN interface card if connecting to PSTN
3Com NBX 100 call processor and chassis
Min. two 3Com IP phones
Min. one PSTN interface card if connecting to PSTN
System Capacity
Supports up to 200 devices (lines/stations),
including up to 100 PSTN Central Office lines
and eight Virtual Tie Lines
including up to 100 PSTN Central Office lines
and eight Virtual Tie Lines
PSTN Gateway Options
Loop-start analog, T1/PRI, E1/PRI, ISDN BRI-ST,
Q.SIG/PRI
Q.SIG/PRI
Port Connections
WAN: via external router with IP-ToS support
LAN: Single 10 MB uplink ports on
the call processor
Diagnostic: Serial port
LAN: Single 10 MB uplink ports on
the call processor
Diagnostic: Serial port
Analog Devices
Supports 2500 series-compatible analog devices,
including cordless phones, fax machines, night bells,
and door ringers
including cordless phones, fax machines, night bells,
and door ringers
Network, Prioritization, and Audio Compression
Standards
Standards
H.323, G.711, G.729a/b, ADPCM, 802.1d, 802.1p,
802.1q, 802.2, 802.3, 802.3af, 802.11, IP, IP-ToS,
DiffServ, TCP/IP, UDP/IP, DHCP, DNS
DiffServ, TCP/IP, UDP/IP, DHCP, DNS
Application Standards
TAPI 2.1, TAPI/WAV, IMAP4, HTTP, H.323,
SMTP/MIME, VPIM
SMTP/MIME, VPIM
Management
Built-in 3Com NBX NetSet
™
utility; 3Com Network
Supervisor support
NBX Voicemail Languages/Dialects
Chinese (Cantonese), Chinese (Mandarin), English
(Australian), English (UK), English (US), French
(Parisian), German, Hebrew, Italian, Spanish
(Castilian), Spanish (Mexican), Russian
(Australian), English (UK), English (US), French
(Parisian), German, Hebrew, Italian, Spanish
(Castilian), Spanish (Mexican), Russian
Power Requirements
Call Processor: 85-264 VAC, 47-63 Hz, 3 A
Chassis: 85-264 VAC, 47-63 Hz, 2.5 A
Chassis: 85-264 VAC, 47-63 Hz, 2.5 A
Power Dissipation
Call Processor: 150 W
Chassis: 130 W
Phone: 5 W (maximum)
Chassis: 130 W
Phone: 5 W (maximum)
Chassis/Call Processor Dimensions and Weight
Height: 29.21 cm (11.5 in)
Width: 50.8 cm (20 in)
Width: 50.8 cm (20 in)
Depth: 43.18 cm (17 in)
Weight: chassis and packaging—10.35 kg (23 lb); call
processor and packaging—13.5 kg (30 lb)
Weight: chassis and packaging—10.35 kg (23 lb); call
processor and packaging—13.5 kg (30 lb)
Environmental Ranges
Operating temperature: 0° to 40°C (32° to 104°F)
Storage temperature: -40° to +70°C (- 40° to +158°F)
Humidity: 5% to 85% noncondensing
Storage temperature: -40° to +70°C (- 40° to +158°F)
Humidity: 5% to 85% noncondensing
Network Access Standards
National Requirements FCC Part 68, Canada CS03
CTR4/A1 (Commission Decision 98/520/EC)
CTR4/A1 (Commission Decision 98/520/EC)
Safety
UL/CUL 1950 3rd Edition
IEC 60950: 1991 + A1, A2, A3, A4; National devia-
tions for Europe and Australia
IEC 60950: 1991 + A1, A2, A3, A4; National devia-
tions for Europe and Australia
Emissions
FCC Part 15 Class A and B
EN 55022:1994/A1, 1995/A2, 1997 Class A
VCCI Class A
AS/NZS 3548:1995 Class A
EN 55022:1994/A1, 1995/A2, 1997 Class A
VCCI Class A
AS/NZS 3548:1995 Class A
Immunity
EN 55024:1998
Ordering Information
Ordering Information