Lexmark X658dme User Manual

Network/Ports Œ Standard Network or Network <x> Œ Std Network Setup or Net <x> Setup Œ Network Card

Connected

Disconnected

Lets you view the connection status of the Network Card

Lets you view the speed of a currently active network card

UAA

LAA

Lets you view the network addresses

Job Timeout
0-225 seconds

Sets the amount of time in seconds that a network print job can take before
it is canceled

90 seconds is the factory default setting.

A setting value of 0 disables the timeout.

If a value of 1–9 is selected, then the setting is saved as 10.

Off

On

Allows the printer to print a banner page

Note: Off is the factory default setting.

Use the following menu items to view or set the TCP/IP information.

Note: This menu is available only for network models or printers attached to print servers.

This menu is available from the Network/Ports menu:

Network/Ports Œ Standard Network or Network <x> Œ Std Network Setup or Net <x> Setup Œ TCP/IP

On

Off

Activates TCP/IP

Note: On is the factory default setting.

Lets you view the current TCP/IP hostname

Note: This can be changed only from the Embedded Web Server.

Lets you view or change the current TCP/IP Address

Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
support BOOTP and RARP.

Lets you view or change the current TCP/IP Netmask

Lets you view or change the current TCP/IP Gateway

Understanding printer menus