Lexmark X644e User Manual
Using the scanner
9
Learning about the MFP
Using the scanner
Basic functions of the scanner
The
Lexmark
X646e and X646dte provide copy, fax, and scan-to-network capability for large workgroups. With either of
these MFPs, you can:
•
Make quick copies, or change the settings on the control panel to perform specific copying jobs.
•
Send an outgoing fax using the MFP control panel.
•
Send an outgoing fax to multiple fax destinations at the same time.
•
Scan documents and send them to your PC, an e-mail address, or an FTP destination.
•
Scan documents and send them to another printer (PDF by way of FTP).
Automatic document feeder and flatbed
Note:
Color documents can be scanned to a PC, e-mail address, or an FTP destination. Printed output on
this MFP is black and grayscale only, not color.
this MFP is black and grayscale only, not color.
The ADF (automatic document feeder) can scan multiple pages including duplex pages. The ADF has two scanner
elements. When using the ADF:
elements. When using the ADF:
•
Place the paper in the ADF face-up, short-edge first.
•
Place up to 50 sheets of plain paper on the ADF input tray.
•
Scan media from 114.0 x 139.4 mm (4.5 x 5.5 in.) to 215.9 x 355.6 mm (8.5 x 14 in.).
•
Scan jobs with mixed page sizes (letter and legal).
•
Scan media weight from 52 to 120 g/m
2
(14 to 32 lb).
Note:
Color documents can be scanned to a PC, e-mail address, or an FTP destination.
•
Copy and print documents at 600 dpi
Note:
Printed output is black and grayscale only, not color.
The flatbed (platen) can be used to scan or copy single pages or book pages. When using the flatbed:
•
Place the document in the left rear corner.
•
Scan or copy media up to 215.9 x 355.6 mm (8.5 x 14 in.).
•
Copy books up to 25.3 mm (1 in.) thick.
•
Copy and print documents at 600 dpi.