Lexmark X548dte User Manual

[none]

Specify a custom name for a paper type. This name replaces the Custom
Type [x]

 name in the printer menus.

Scan Size Name
Width

1–11.69 inches (25–297 mm)

Height

1–17 inches (25–432 mm)

Orientation

Portrait
Landscape

2 scans per side

Off
On

Specifies a custom scan size name, scan sizes, and options. The custom scan
size name replaces Custom Scan Size [x] in the printer menus.

11.69 inches is the US factory default setting for Width. 297 millimeters
is the international factory default setting for Width.

17 inches is the US factory default setting for Height. 432 millimeters is
the international factory default setting for Height.

Portrait is the factory default setting for Orientation.

Off is the factory default setting for 2 scans per side.

Inches
Millimeters

Identifies the unit of measure

Note: Inches is the US factory default setting. Millimeters is the
international factory default setting.

3–14.17 inches
76–360 mm

Sets the portrait width

8.5 inches is the US factory default setting. Inches can be increased
in 0.01

‑inch increments.

216 mm is the international factory default setting. Millimeters can
be increased in 1

‑mm increments.

If the width exceeds the maximum, then the printer uses the
maximum width allowed.

Understanding printer menus

134