Lexmark X548dte User Manual

3–14.17 inches
76–360 mm

Sets the portrait height

14 inches is the US factory default setting. Inches can be increased in
0.01

‑inch increments.

356 mm is the international factory default setting. Millimeters can
be increased in 1

‑mm increments.

If the height exceeds the maximum, then the printer uses the
maximum height allowed.

Short Edge
Long Edge

Specifies the feed direction

Short Edge is the factory default setting.

Long Edge appears only if the longest edge is shorter than the
maximum width supported by the tray.

Prints a report containing information about the paper loaded into trays, installed
memory, total page count, alarms, timeouts, printer control panel language,
TCP/IP address, status of supplies, status of the network connection, and other
information

Prints a report containing printer statistics such as supply information and details
about printed pages

Prints a report containing information about the network printer settings, such
as the TCP/IP address information

Note: This menu item appears only in network printers or printers connected
to print servers.

Prints a report containing information about configured shortcuts

Prints a report containing information about the last 200 completed faxes

Note: This menu item is available only when Enable Job Log is set to On in the
Fax Settings menu.

Prints a report containing information about the last 100 attempted, received,
and blocked calls

Note: This menu item is available only when Enable Job Log is set to On in the
Fax Settings menu.

Prints a report containing information about copy shortcuts

‑mail Shortcuts

Prints a report containing information about e

‑mail shortcuts

Prints a report containing information about fax shortcuts

Understanding printer menus

135