Lexmark X646e User Manual

The following illustration shows the path that print media travels through the MFP. The path varies depending on the input 
source (trays, multipurpose feeder, envelope feeder) you are using.

The numbers in following illustration indicate the numbers that can appear on the control panel and designate the general 
area of a paper jam.

Floor-mounted configurations require additional furniture for stability. You must use either 

a printer stand or printer base if you are using a 2000-sheet drawer. Certain other configurations also 
must have a printer stand or printer base. More information is available on our Lexmark Web site at 

.

The following table lists the jam messages that can occur and the action necessary to clear the message. The jam 
message indicates the area where the jam occurred. However, it is best to clear the entire paper path to ensure you have 
cleared all possible jams.

Open the bottom then top front covers, remove the print cartridge, and then 
remove the jam.

Open the rear door on the MFP, and remove the jam.

Remove the duplex tray from the duplex unit, raise duplex deflector, and 
remove the jam. Open the rear duplex door, and remove the jam.

Open each tray, and remove any jammed media.

Remove all media from the multipurpose feeder, flex and stack the media, 
reload the multipurpose feeder, and adjust the guide.