Lexmark X746de User Manual

Replace the photoconductor of the color with the repeating defect, if the defects occur in the following instances:

Every 28.3 mm (1.11 in.) of the page

Every 72.4 mm (2.85 in.) of the page

Replace the fuser if print defects occur in the following instances:

Every 47.4 mm (1.87 in.) of the page

Every 94.8 mm (3.73 in.) of the page

Every 113 mm (4.45 in.) of the page

ABCDE

ABCDE

ABCDE

ABCDE
ABCDE
ABCDE

Make sure the paper type and weight settings match the paper loaded in the tray:

From the Paper menu on the printer control panel, check the Paper Type and Paper Weight settings.

Before sending the job to print, specify the correct paper type setting:

For Windows users, specify the paper type from Print Properties.

For Macintosh users, specify the paper type from the Print dialog.

Replace the defective photoconductor.

Remove the cartridge.

Warning—Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print
quality of future print jobs.

Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner.

Reinsert the cartridge.

Note: If print quality does not improve, then replace the cartridge.

Troubleshooting

314