Lexmark MS312dn Laser Printer User Manual
For more information, visit
or contact customer support.
Remove paper from standard output bin
Remove the paper stack from the standard bin.
Serial option [x] error [54]
Try one or more of the following:
•
Make sure that the serial cable is properly connected and is the correct one for the serial port.
•
Make sure that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer
and computer.
and computer.
•
From the printer control panel, press
to continue printing.
•
Turn off the printer, and then turn it back on.
SMTP server not set up. Contact system administrator.
From the printer control panel, press
to clear the message.
Note: If the message appears again, then contact your system support person.
Standard network software error [54]
Try one or more of the following:
•
From the printer control panel, press
to confirm.
•
Unplug the router, then wait for 30 seconds, and then plug it back again.
•
Turn off the printer, and then turn it back on.
•
Update the network firmware in the printer or the print server. For more information, visit the Lexmark Web site
at
at
Standard parallel port disabled [56]
•
From the printer control panel, press
to clear the message.
Notes:
•
The printer discards any data received through the parallel port.
•
Make sure the Parallel Buffer menu is not set to Disabled.
Troubleshooting
166