Lexmark MS312dn Laser Printer User Manual
Use
To
On
Reduce printer noise.
Notes:
•
Print jobs will process at a reduced speed.
•
Printer engine motors do not start until a document
is ready to print. There is a short delay before the
first page is printed.
is ready to print. There is a short delay before the
first page is printed.
Off
Use factory default settings.
Note: This setting supports the performance
specifications of the printer.
specifications of the printer.
3
Press
.
Adjusting Sleep mode
To save energy, decrease the number of minutes before the printer enters Sleep mode. Select from 1 to 120. The factory
default setting is 30 minutes.
default setting is 30 minutes.
Note: The printer still accepts print jobs when in Sleep mode.
Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 123.123.123.123.
sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Navigate to:
Settings > General Settings > Timeouts
3
In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode.
4
Click Submit.
Using the control panel
1
From the control panel, navigate to:
> Settings >
> Settings >
> General Settings >
> Timeouts >
> Sleep Mode >
2
In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep mode.
3
Press
.
Managing the printer
69