Lexmark MS312dn Laser Printer User Manual
Use
To
Netmask
View or change the current TCP/IP netmask.
Gateway
View or change the current TCP/IP gateway.
Enable DHCP
On
Off
Off
Specify the DHCP address and parameter assignment.
Note: On is the factory default setting.
Enable AutoIP
Yes
No
No
Specify the Zero Configuration Networking setting.
Note: Yes is the factory default setting.
Enable FTP/TFTP
Yes
No
No
Enable the built-in FTP server, which lets you send files to the printer using File Transfer
Protocol.
Protocol.
Note: Yes is the factory default setting.
Enable HTTP Server
Yes
No
No
Enable the built-in Web server (Embedded Web Server). When enabled, the printer
can be monitored and managed remotely using a Web browser.
can be monitored and managed remotely using a Web browser.
Note: Yes is the factory default setting.
WINS Server Address
View or change the current WINS server address.
Enable DDNS
Yes
No
No
View or change the current DDNS setting.
Note: Yes is the factory default setting.
Enable mDNS
Yes
No
No
View or change the current mDNS setting.
Note: Yes is the factory default setting.
DNS Server Address
View or change the current DNS server address.
Backup DNS Server Address
View or change the backup DNS server addresses.
Backup DNS Server Address 2
Backup DNS Server Address 3
Enable HTTPS
Yes
No
No
View or change the current HTTPS setting.
Note: Yes is the factory default setting.
IPv6 menu
To access the menu, navigate to any of the following:
•
Network/Ports > Standard Network > Standard Network Setup > IPv6
•
Network/Ports > Network [x] > Network [x] Setup > IPv6
Note: This menu is available only in network printers or printers connected to print servers.
Understanding the printer menus
96