LevelOne EPS-3001TU User Manual
Level One Printer Servers
Printing - General
Problem No. 1
When using 10BaseT cabling, the LevelOne Printer Server unit
does not work.
does not work.
Solution No. 1
Check the Hub’s link LED for the port to which the LevelOne
Printer Server is connected. If it is off, there is a problem in the
network cable. If using 10BaseT or 100BaseT, check the LED next
to the connector. It should be on if the network connection is OK.
Printer Server is connected. If it is off, there is a problem in the
network cable. If using 10BaseT or 100BaseT, check the LED next
to the connector. It should be on if the network connection is OK.
Problem No. 2
A printing device connected to the a LevelOne Printer Server
port cannot print or prints garbage.
port cannot print or prints garbage.
Solution No. 2
Check the following:
• Cable connection between LevelOne Printer Server and printer.
• Printer driver in the application program or Windows matches
• Cable connection between LevelOne Printer Server and printer.
• Printer driver in the application program or Windows matches
the printer.
Problem No. 3
The Configuration button on the Printer Status screen in
BiAdmin is grayed out, even though my printer in bi-
directional.
BiAdmin is grayed out, even though my printer in bi-
directional.
Solution No. 3
The button is unavailable if the printer is busy. You must wait until
the printer is idle.
the printer is idle.
- 78 -