KYOCERA 2020D User Manual

7-36

Using the Operation Panel

Using the duplexer, you can automatically print on both sides of the 
paper. The duplexer is mounted underneath the printer.

Duplex printing is available for the following paper types:

PLAIN
PREPRINTED
BOND
RECYCLED
ROUGH
LETTERHEAD
COLOR
PREPUNCHED
HIGH QUALITY
CUSTOM 1 (to 8)

Activating the duplexer is done by selecting either short edge or long 
edge binding mode.

Binding refers to the manner in which printed pages of paper are joined 
together (by gluing, stitching, etc.) in book form. The two possible types 
of binding are: long-edge binding, in which pages are joined together 
along their long edge; and short-edge binding, in which they are joined 
together along their short edge. In selecting a binding type, you must 
also consider the orientation of the printed page. You can use long-edge 
or short-edge binding with either landscape or portrait printing.

Depending on the binding type and print orientation, the duplexer 
provides four types of binding. These are: (1) portrait, long-edge, (2) 
portrait, short edge, (3) landscape, long-edge, and (4) landscape, short-
edge. The figure below shows these binding methods. 

1

Press 

Z while Print Settings > is displayed.

2

Press 

U or V repeatedly until >Duplex appears.

3

Press 

[OK]. A blinking question mark (?) appears.

Duplex printing can be also performed from the MP tray. If 

the paper to be fed from the MP tray does not match the paper size 
and paper type of the current paper feed source cassette, a paper 
jam may occur.

Portrait, 
long-edge

Landscape, 
long-edge

Portrait, 
short-edge

Landscape, 
short-edge

>Duplex
? Off