KYOCERA 2020D User Manual

Paper Handling

2-7

The following types of special paper can be used:

Use paper that is sold specifically for use with copiers or printers (heat-
fusing type). When using transparencies, labels, envelopes, cardstock, 
coated, or thick paper, feed the paper from the MP Tray.

Since the composition and quality of special paper vary considerably, 
special paper is more likely than white bond paper to give trouble during 
printing. No liability will be assumed if moisture and so forth given off 
during printing on special paper causes harm to the machine or operator.

Transparencies must be fed to the MP Tray. One transparency can be 
loaded at a time.

Transparencies must be able to withstand the heat of fusing during the 
printing process. The recommended transparency product is 3M PP2500 
(Letter, A4).

Transparencies must be placed on the MP tray with the long edge 
towards the printer.

When unloading transparencies (e.g., for clearing jams), hold them 
carefully by the edges to avoid leaving fingerprints on them.

Labels must be fed to the MP Tray. One label can be loaded at a time.

The basic rule for printing on adhesive labels is that the adhesive must 
never come into contact with any part of the machine. Adhesive paper 
sticking to the drum or rollers will damage the machine.

Thin paper (60 to 64 g/m²)

Vellum

Thick paper (90 to 220 g/m²)

Thick

Colored paper

Color

Recycled paper

Recycled

Overhead projector transparencies

Transparency

Cardstock

Cardstock

Envelopes

Envelope

Label

Labels

Before purchasing any type of special paper, test a sample 

on the machine and check that printing quality is satisfactory.

MP Tray