Avery 9493 User Manual
6. Press
D until Setup is highlighted.
Setup
Service
E U
D
7. Press
E to select Setup.
8. From the Setup menu, press
D until you see RF Network. Press E to select RF Network.
The RF Network menu allows you to check the printer’s status, configure the RF network
settings, print RF settings, and reset the radio.
To exit, press
settings, print RF settings, and reset the radio.
To exit, press
F at any time.
Checking the Status
This option displays the status of the RF network.
1. From the RF Network menu, select Status.
1. From the RF Network menu, select Status.
192.0.0.192
1.0
(2006.11.20)
PXR1E858F
The local IP address, firmware version, printer model, board revision, and device name
are displayed.
are displayed.
2. Press
A to see the next screen of information.
0040171
E
858F
Protocol : TCP
State : Wait
Radio : IEEE 802.11g
The MAC address, protocol, current state, and radio type are displayed.
3. Press any
A to return to the RF Network menu.
Configuring the Printer
The Configure menu allows you to set the printer’s IP address, subnet mask, gateway, power
mode, protocol, SSID, and escape character.
To exit, press
mode, protocol, SSID, and escape character.
To exit, press
F at any time.
Setting the IP Address
This option sets the printer’s IP address.
1. From the RF Network menu, select Configure.
2. From the Configure menu, select IP Address.
1. From the RF Network menu, select Configure.
2. From the Configure menu, select IP Address.
IP
Address
192.0.0.192
E R
+
For: Select:
BOOTP 0.0.0.0
DHCP 0.0.0.1
Static IP
BOOTP 0.0.0.0
DHCP 0.0.0.1
Static IP
nnn.nnn.nnn.nnn
Configuring the 802.11b/g and IP Settings 2-5