Avery 9493 User Manual
4. Use
D to select the power mode you want. Press E to save the setting.
If you select PSP, you are prompted to enter a PSP algorithm between 1-5.
3
3
X 4
E U
D
1 = shortest sleep time (uses battery power quicker, but responds faster); 5 = longest
sleep time (optimal battery conservation, but responds slower).
sleep time (optimal battery conservation, but responds slower).
5. Use
U or D to select the PSP algorithm you need. Press E to save the setting. Select
Exit to return to the Configure menu.
Setting the Port
This option sets the port.
1. From the Configure menu, select Port: TCP or LPD.
1. From the Configure menu, select Port: TCP or LPD.
Protocol
3
TCP
X LPD
E U
D
2. Use
D to select the protocol you want. For example, if you select LPD, you must specify a
raw printer port:
Port
+
09100
E U
+
Use
A as shown in the following table:
E
Press
A to
R
Press
A to
+
Press
Press
A to
Saves the setting
Scrolls through the positions
from left to right
from left to right
Toggles between + or –; also
increments the current position
setting by 1
increments the current position
setting by 1
3. Press
E to save the setting. You return to the Configure menu.
Setting the SSID
This option sets the SSID. The SSID is case-sensitive.
1. From the Configure menu, select SSID.
1. From the Configure menu, select SSID.
SSID
ABC
1234
E R
+
Use
A as shown in the following table:
E
Press
A to
R
Press
A to
+
Press
Press
A to
Saves the setting
Scrolls through the positions
from left to right
from left to right
Increments the current position
setting by 1 and scrolls through
alpha/special characters
setting by 1 and scrolls through
alpha/special characters
2. When the setting you want is displayed, press
E to save the setting. You return to the
Configure menu.
Configuring the 802.11b/g and IP Settings 2-7