Gateway ALR 7200 User Manual
4 Gateway ALR 7200 User’s Guide
Connecting Peripherals
Refer to Figure 1 and the following procedures when connecting optional
peripherals to your system.
peripherals to your system.
Figure 1: Connecting Peripherals
1.
Connect the keyboard and mouse to their respective ports, using the
pictures embossed on the system’s back panel as a guide.
pictures embossed on the system’s back panel as a guide.
2.
Connect the monitor video cable to the video port. The location of the
port may vary depending on whether you use the integrated video or a
video card.
port may vary depending on whether you use the integrated video or a
video card.
3.
Connect the monitor power cable to an AC outlet or preferably, a surge
control outlet station.
control outlet station.
Note:
Shielded cables are
required by the FCC.
required by the FCC.
3435.boo Page 4 Thursday, August 6, 1998 7:12 AM