Fluke 2620A User Manual

Users Manual

A-16

90V to 264V ac (no switching required), 50 and 60 Hz, 10 VA maximum
9V dc to 16V dc, 10W maximum
If both sources are applied simultaneously, ac is used if it exceeds approximately 8.3
times dc.
Automatic switchover occurs between ac and dc without interruption.
(At 120V ac the equivalent dc voltage is ~14.5V).

IEC 1010-1, ANSI/ISA S82.01-1994, CSA-C22.2 No.1010.1-92, and EN61010-1:1993.

Complies with EN 50081-1, EN 50082-1, Vfg. 243/1991 and FCC-15B at the Class B
level, when shielded cables are used.

Connector:

9 pin male (DB-9P)

Signals:

TX, RX, DTR, GND

Modem Control:

full duplex

Baud rates:

300, 600, 1200, 2400, 4800, and 9600

Data format:

8 data bits, no parity bit, one stop bit, or 7 data bits, one parity

bit 

(odd or even), one stop bit

Flow control:

XON/XOFF

Echo:

on/off

Stores 2047 scans
Each scan includes:

•

 

Time stamp

•

 

Readings for all defined analog input channels

•

 

Status of the eight digital I/O

•

 

Totalizer count

Memory is battery-backed
Memory life: 5 years minimum at 25°C

Capability codes: SH1, AH1, T5, L4, SR1, RL1, PP0, DC1, DT1, E1, TE0, LE0, and C0

Complies with IEEE-488.1 standard.