Adtran 336048VUR-2 User Manual
Appendix C. Status Buffer Messages
66
Express XR/XRT Quick Start Guide
61200.153L1-1
AutoSwitch YYY
Switch type YYY detected during AutoSpid determination.
(YYY can be DMS, NI-1, or AT&T)
Switch type YYY detected during AutoSpid determination.
(YYY can be DMS, NI-1, or AT&T)
Back to online
Express XR went back on line.
Express XR went back on line.
Bad async BPS
The Bonding protocol determined that the selected asynchro-
nous bit rate is not supported.
The Bonding protocol determined that the selected asynchro-
nous bit rate is not supported.
Bad AT numeric
User issued an AT command with an argument that was out of
range.
User issued an AT command with an argument that was out of
range.
Bad call type
Express XR placed a call with an improper call type.
Express XR placed a call with an improper call type.
Bad DTE Baud
The DTE bit rate does not match a valid bit rate for the protocol
selected.
The DTE bit rate does not match a valid bit rate for the protocol
selected.
BAD_INFO_ELEM
Call control error.
Call control error.
Bad phone number
Express XR/XRT attempted to call an invalid phone number.
Express XR/XRT attempted to call an invalid phone number.
BEAR_CAP_NOT_AVAIL
The bearer channel requested is not available.
The bearer channel requested is not available.
BEARER_CAP_NOT_AUTH
Bearer capability requested is not authorized.
Bearer capability requested is not authorized.
Bearer Mode?
Incoming call is not of a type the Express XR/XRT can accept.
Incoming call is not of a type the Express XR/XRT can accept.
Bearer Info Cap?
Incoming call information transfer capability is not known.
Incoming call information transfer capability is not known.
BONDING (+/-XXX)
The amount of bytes or corrected delay between the B2 and B1
Bearer channels (XXX can range from -8000 to +8128).
The amount of bytes or corrected delay between the B2 and B1
Bearer channels (XXX can range from -8000 to +8128).