Adtran 336048VUR-2 User Manual
61200.153L1-1
Express XR/XRT Quick Start Guide
67
Appendix C. Status Buffer Messages
BPS mismatch
Bonding negotiation found a bit rate mismatch.
Bonding negotiation found a bit rate mismatch.
Break to AT cmd
User issued a break-in request.
User issued a break-in request.
Break ignored
User issued an extra break-in request.
User issued an extra break-in request.
BUSY
The called number is busy.
The called number is busy.
B-X disconnected
B-channel disconnected. X can be 1 or 2 representing the appro-
priate B-channel.
B-channel disconnected. X can be 1 or 2 representing the appro-
priate B-channel.
CallID 1 in use
The Express XR/XRT tried to place a call using SPID 1 when
SPID 1 was already in use.
The Express XR/XRT tried to place a call using SPID 1 when
SPID 1 was already in use.
CallID 2 in use
The Express XR tried to place a call using SPID 2 when SPID 2
was already in use.
The Express XR tried to place a call using SPID 2 when SPID 2
was already in use.
Call lost
Held call could not be retrieved.
Held call could not be retrieved.
Call not ringing
User executed an answer command (ATA) but there was not a
call present.
User executed an answer command (ATA) but there was not a
call present.
CALL_REJECTED
The call has been rejected by the ISDN network.
The call has been rejected by the ISDN network.
Can't go online
Express XR/XRT cannot go back on line. Unknown AT com-
mand user issued an unknown AT command.
Express XR/XRT cannot go back on line. Unknown AT com-
mand user issued an unknown AT command.
CHAN_DOES_NOT_EXIST
The user asked for a bearer channel that is not present.
The user asked for a bearer channel that is not present.
CHAN_NOT_IMPLEMENTED
The network or far end does not support the bearer capability
requested.
The network or far end does not support the bearer capability
requested.