Powerware UPS 1000 - 2200 User Manual
1000 - 2000 VA
User’s Manual
1019297
Revision A
14
Network Transient Protector
The Network Transient Protector, shown in Figure 9, is located on the rear panel and
has jacks labeled IN and OUT. This feature accommodates a single RJ–45 (10BaseT)
network connector.
has jacks labeled IN and OUT. This feature accommodates a single RJ–45 (10BaseT)
network connector.
Connect the input connector of the equipment you are protecting to the jack labeled IN.
Connect the output connector to the jack labeled OUT.
Connect the output connector to the jack labeled OUT.
Figure 9. Network Transient Protector