Powerware 400/230V User Manual
OPERATION
EATON Powerware
®
Energy Management System (EMS) Upgrade Kit User’s Guide
S
164201724 Rev 1
www.powerware.com
42
Setup Options
Access to setup options is restricted to three System Setup Levels: 0, 1,
or 2. The higher the level, the more setup options are available. Options
on System Setup Level 0 do not require password access.
or 2. The higher the level, the more setup options are available. Options
on System Setup Level 0 do not require password access.
Table 9. Setup Options
Minimum
Level*
Description
Available Settings
Default Setting
0
Enter Password
Use the arrow keys to enter the password for the level you
want to access, then select DONE to display the options for
the setup level
want to access, then select DONE to display the options for
the setup level
Level 1: L1
Level 2: Contact your
service representative
Level 2: Contact your
service representative
0
Versions
Read only
Current firmware
versions installed
versions installed
0
Contrast Adjust
Adjust screen contrast with left/right arrow buttons
10%
1
Log Out
Exit the Level 1 or Level 2 setup options and display the
Level 0 setup options
Level 0 setup options
None
1
Change Access
Level Password
Level Password
Change the password for the current setup level
Use the arrow keys to enter the new password (A–Z, 0–9, –,
blank,), then select DONE to save the new password.
Use the arrow keys to enter the new password (A–Z, 0–9, –,
blank,), then select DONE to save the new password.
None
1
Set Date and Time
Set Month, Date, Year (mm/dd/yyyy)
Set Hour, Minute (Time is a 24−hour clock.)
Set Hour, Minute (Time is a 24−hour clock.)
00/00/0000
00:00
00:00
1
Clear History
Clear the History Log
None
1
Clear Load Profile
Clear the Load Profile
None
1
For Building Alarm 1 through Building Alarm 4:
Name String [up to 19 characters (A–Z, 0–9, –, blank)]
Settings: Contact Normally Open or Closed
Name String [up to 19 characters (A–Z, 0–9, –, blank)]
Settings: Contact Normally Open or Closed
Building Alarm Type (REPO, EPO, TVSS/SPD,
Custom)
Notice Level (Log and Alarm options)
Enabled/Disabled
BUILDING ALARM [X]
Open
1 and 2: Custom;
3: REPO; 4: EPO
Log Only
Enabled
Open
1 and 2: Custom;
3: REPO; 4: EPO
Log Only
Enabled
1
THD Alarm Level
Set the voltage and current Total Harmonic Distortion for
Input 1 and Input 2, and enable or disable this feature:
THD settings
Enabled/Disabled
Input 1 and Input 2, and enable or disable this feature:
THD settings
Enabled/Disabled
5.0
Disabled
Disabled
2
Unit Type
Read only: Model / CTO / Serial
Factory−set identifiers
2
Unit Name
Up to 19 characters (A–Z, 0–9, –, blank)
EATON EMS−UGK
2
Reset All Lower
Level Passwords
Level Passwords
Reset the Level 1 password to the default setting
None
* Minimum System Setup Level required to access the setup option.