Black Box LE074AE-R2 User Manual

7. In the “Network Settings”

window, choose “OK.” From the
next window choose “Restart
Computer.”

The content of the Modular Parallel
Adapter OEMSETUP.INF file is:

[disks]
A:=., “Modular Parallel Adapter
install”

[netcard]
ms$sndis=“Modular Parallel
Adapter”, 0, ndis, ethernet, real,
ms$sndis, ms$sndis_nif

[ms$sndis]
devdir=b:setndis.dos
device=SETNDIS.DOS,
@devdir\SETNDIS.DOS

[ms$sndis_nif]
DRIVERNAME=SETNDIS$

Note that the [netcard] section
consists of one line only.

The SETNDIS is a self-configuring
driver that automatically detects the
correct LPT port, Interrupt line, and
Unidirectional/Bidirectional mode
to be used. If you have a special
configuration, you may need to
override this automatic selection by
editing the PROTOCOL.INI file.

The Adapter’s section in the
PROTOCOL.INI includes:

;MODULAR PARALLEL
ADAPTER DRIVERNAME =
SETNDIS$

;POLLING
;UNIDIR
;LPTn
;EPP
;DISABLELINK

Lines preceded by semicolons are
comments. To select an option, edit
the semicolon out of the
corresponding line.

1. Run the LANtastic/Al v5.x

INSTALL program.

2. Complete the installation by

entering default parameter for
the LAN adapter and exit the
INSTALL program.

3. Copy the driver from the

Network Drivers diskette to the
Network Operating System
(NOS) subdirectory (default is
C:\LANTASTI): copy
a:\lantasti\*.* c:\lantasti

4. Edit the file STARTNET.BAT in

the C:\LANTASTI by deleting
the line which starts with
3C503MM and insert a new line:

SETAILAN verbose

5. Installation is complete.