Avaya 1151C1 User Manual

The most careful attention has been devoted to quality standards in the manufacture of 

your new power supply. Safety is a major factor in the design of every Avaya Product. 

But, safety is YOUR responsibility too. Please read carefully the helpful tips listed 

below. These suggestions will enable you to take full advantage of this product. Then, 

retain these tips for later use.

!

This product is NOT for residential use. It is for business systems applications 
ONLY.

When using your power supply, the following safety precautions should always be 

followed to reduce the risk of fire, electric shock, and injury to persons.

•

Read and understand all instructions.

•

Follow all warnings and instructions marked on the product and contained in its 

packaging.

•

The 1151C1/C2 Power Supplies are for use only with specified Avaya equipment as 

outlined in the attached materials or available on 

. 

No other use of the 1151C1/C2 Power supplies is recommended or warranted

•

The equipment must not be connected to TNV-3 (standard analog phone lines) or 

TNV-2 circuits.

•

For Australia, the equipment must not be connected to any TNV circuit.

•

The equipment must not be installed in proximity to standard phone lines.

•

This device can be hazardous if immersed in water. Do not use this product near 

water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet 

basement or near a swimming pool. To avoid the possibility of electric shock, do not 

use it while you are wet. If you accidentally drop the power supply into water, do not 

retrieve it until you have first unplugged the line cord from the modular wall jack, 

unplugged the power cord from the AC wall receptacle (or other AC power source), 

and unplugged the output cable from any device powered by the supply. Then, call 

service personnel to ask about a replacement.

•

This product should be operated only from the type of AC power indicated on the 

product label. If you are unsure of the type of AC power being provided, contact a 

qualified service person.

•

Do not allow anything to rest on the power cord. Do not locate this product where 

the cord will be abused, such as by persons walking on it.

•

Allow adequate ventilation for the product. Do not cover or install in a confined 

space that may prevent cooling and allow excessive heat build-up.

•

To reduce the risk of electric shock, do not disassemble this product. There are no 

user serviceable parts. Opening or removing covers may expose you to hazardous 

voltages. Incorrect reassembly can cause electric shock when the product is 

subsequently used.

•

The Avaya model 1151C2 power supply contains a non-spillable sealed lead-acid 

battery. Reasonable care should be taken to avoid puncturing, or otherwise 

compromising the integrity of the battery housing. Recycle the battery properly.

!

RISK OF EXPLOTION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. 
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

•

Before cleaning or removing from service, unplug the power supply from the 

modular wall jack, unplug the power cord from the AC wall receptacle (or other AC 

power source), and unplug the output cable from any device powered by the 

supply. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for 

cleaning.

•

Be sure to disconnect all cords from this product and refer servicing to qualified 

service personnel when these conditions exist:

— If the power supply cord is damaged or frayed.
— If liquid has been spilled into the product.
— If the product has been exposed to rain or water.
— If the product has been dropped or the housing has been damaged.
— If you note a distinct change in the performance of the product.

To download the Declaration of Conformity (DoC) for this equipment, visit 

When you see this warning symbol on the product, refer to 
this instructions booklet for more information before 
proceeding.

16-600743

Issue 2, February 2006